Reactivation Shampoo
Descaling soap for ceramic coatings
Strong foaming, acidic shampoo to reactivate ceramic seals. Hydrophilic dirt such as dust, limescale and salts are removed by washing with the Reactivation Shampoo. Such dirt impairs the easy-to-clean effect and the hydrophobic effect of the ceramic-sealed surfaces. The acidic setting of the shampoo ensures that the dirt is loosened and removed. This revives the dirt and water-repellent properties of the ceramic coating.
Information on which containers of the product are consumer compliant is available upon request. This product may not be available in every region.
Container
- 1 LArticle No. 806001US
Downloads
- Product Information US English |
- Safety Data Sheet US English |
Lacquer, glass and plastic in the outdoor area
Coarse dirt should be removed with an alkaline pre-cleaner and high-pressure wash before using Reactivation Shampoo. Dilute the shampoo 1:200 (for hand washing 50 ml to 10 l) with water. This achieves a pH of 3.0. When using a foam cannon, adjust the pre-dilution accordingly. Wash the pre-cleaned and still wet vehicle with a washing sponge. Rinse the product thoroughly to avoid stains. Dry off residual water.
Do not let the product dry. Check for material compatibility before use. Protect from frost and excessive heat. Wearing gloves is recommended during application.
Suitable products for your selection.
Ceramic Allround C0.02
MoreLessCeramic Allround C0.02 is a ceramic coating which can be used on a variety of surfaces to provide long-lasting protection. The very thin…
Ceramic Allround C0.02
You might also be interested
in these products.
Pro Drying Towel
MoreLessThe premium cloth for gentle and effective drying of paint surfaces after washing the vehicle. Extremely absorbent and gentle on paintwork…
Pro Drying Towel
Waschschwamm
MoreLessPaintwork-protecting, tear proof and chemical-resistant washing sponge with high water and foam absorption capacity. A special foam…
Waschschwamm