To main content

Micro Cut M3.02

Micro Cut M3.02 is the latest generation machine micro-polish for the permanent removal of streaks, holograms, fine scratches and sanding marks to P3000 grain size on all paint systems (including scratch-resistant). Through the use of highly specialised, extremely homogenous abrasive bodies, a brilliant permanent high gloss finish is created under extreme light conditions even on dark and similarly sensitive shades. Holograms and fine scratches are eliminated mechanically and not, which is often the case, covered over. Micro Cut M3.02 is extremely economical, easy to polish and removable without leaving traces. Cut: 3,2 Gloss: 9,0
Micro Cut M3.02

LackbehandlungMore about the product system

Information on which containers of the product are consumer compliant is available upon request. This product may not be available in every region.

Micro Cut M3.02
Micro Cut M3.02 Micro Cut M3.02 Watch video

Container

  • 1 LArticle No. 403001US
  • 5 LArticle No. 403005US
  • 0,25 LArticle No. 403250US

Downloads

Paintwork of cars, commercial vehicles, motor cycles, etc.

Recommendations for use

For optimum results we recommend using our Micro Cut Pad and an orbital polisher with forced rotation (eg Makita PO5000C, highest speed). Alternatively a rotary polisher can be used in combination with our Micro Cut Pad. Before use, moisten dried or new pads completely with polish. With the machine switched off, apply the polish evenly over the surface to be treated and then polish crosswise with medium pressure until a transparent film appears, ie, until the aluminium oxide in the polish has completely broken down. Do not use pads used with this product for other products. For non-scratch and groove-free removal of polish residues we recommend our non-chainstitched Profi microfibre cloth that has been ultrasonically cut.

Shake before using.;Before using, check suitability and compatibility.;Do not use on hot surfaces.;Protect against frost and excessive heat.;

Suitable products for your selection.

Exzenterpolierer Flex XFE 7-15 150

Exzenterpolierer Flex XFE 7-15 150

The Flex XFE 7-15 150 is an eccentric polishing machine for the professional vehicle refurbisher or painter. The polisher has a power of 420…

Exzenterpolierer Flex XFE 7-15 150
Flex PXE 80 10.8-EC/2.5 Set

Flex PXE 80 10.8-EC/2.5 Set

The Flex PXE 80 is the ideal complementary device for every vehicle refurbisher, painter and the spot repair sector. Flexible and easy as…

Flex PXE 80 10.8-EC/2.5 Set

You might also be interested
in these products.

Fine Cut F6.01

Fine Cut F6.01

Intelligent machine polish of the latest generation with unique aluminium oxide quality. The intelligent grain size ensures very quick,…

Fine Cut F6.01
Micro Cut M3.02

Micro Cut M3.02

Micro Cut M3.02 is the latest generation machine micro-polish for the permanent removal of streaks, holograms, fine scratches and sanding…

Micro Cut M3.02