Gelcoat Micro Cut
Micro polishing compound for gelcoats and boat paints
Machine polish for lightly weathered and matt gelcoats and boat paints for the permanent removal of polishing haze, holograms and fine scratches. Holograms and fine scratches are mechanically eliminated. High yield, easy to polish and easy to wipe off. The ideal preparation for subsequent sealing.
Information on which containers of the product are consumer compliant is available upon request. This product may not be available in every region.
Container
- 1 LArticle No. 497001
Downloads
- Product Information English |
- Safety Data Sheet English |
For the permanent removal of polishing haze, holograms, fine scratches on gelcoats and boat paints
Can be applied using an eccentric polishing machine. Spread 5 pea-sized drops on a suitable polishing pad (Micro Cut Pad hard) and work in a crosswise motion. Spread the product on the surface at low speed and then process at the highest speed. Buff out the polish and remove any remaining polish with a Polish & Sealing Towel. Subsequent sealing is necessary. We recommend sealing after polishing with Gelcoat Finish, Marine Protective Sealant or Ceramic Boat Hull to close the pores of the surface.
Shake before use. Check for material compatibility before use. Do not use on hot surfaces. Protect from frost and excessive heat. Do not use on unpainted plastics and rubber.