Hull Precleaner acid
Acidic pre-cleaner for boat hulls and decks
The highly concentrated Hull PreCleaner acid for pre-washing the boat deck and hull is suitable for gelcoat, paint and plastic surfaces as well as for cleaning stainless steel. The combination of mild acids and surfactants enables gentle, thorough cleaning of the boat, dissolves limescale deposits and removes rust stains.
Information on which containers of the product are consumer compliant is available upon request. This product may not be available in every region.
Container
- 1 LArticle No. 512001
- 10 LArticle No. 512010
Downloads
- Product Information English |
- Safety Data Sheet English |
Gelcoat, paint and plastic surfaces on board, e.g. hull and deck
Depending on the degree of soiling, dilute the pre-cleaner 1:10 with water, apply pure for heavy soiling; apply to the surface using the Pressure Sprayer acid or washing sponge and leave to work for a maximum of 5 minutes. If necessary, rework with the Interior Scrubber. Then rinse thoroughly with water and a sponge. After thorough cleaning, polish and seal the surface to protect it from rapid resoiling. When cleaning, avoid sensitive surfaces such as galvanized steel or aluminium surfaces.
Do not use on real wood surfaces and aluminum. Only use on washable surfaces. Do not allow to dry. Check suitability and compatibility before use. Do not use on hot surfaces. Wear safety glasses during application.